Silicate / mixed - bed resin filter Ø 100mm 2 - 3 - 4 liter volume

Dreambox - silicate  / mixed-bed resin filter Ø 100mm
in 3 sizes 2,0 - 3,0 - 4,0 liter 

Technical data:
Dimensions: Ø 100mm (tube) // Ø 130 mm (cup)

Volume:  ~ 2,0 liter model
Height: 260 mm, 300 mm mit Anschlüßen
Base/foot print: 120 x 120 mm

Volume:  ~ 3,0 liter model
Height: 400 mm, 440 mm mit Anschlüßen
Base/foot print : 140 x 140 mm

Volume:  ~ 4,0 liter model
Height: 530 mm, 570 mm mit Anschlüßen
Base/foot print: 160 x 160 mm


With massiv base, for save installation
Flange with 8x M6 V4A screws

Inlet / Outlet for 10 mm pipes
With Exhaust valve

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Flter made of PVC an high quality acryl-glass / Plexiglas^®

• Universal usable as media filter for differ medias
• 100 mm Acryl Media - pipe
• All O-Rings made of Silicone 30 Shore hardness
• Flange plate on the top, fixed with 8 x M6 V4A screws
• Ø 10mm Inlet, Ø 10mm Outlet, incl. connection piping
• high quality rigid PVC and Plexiglas^® (plexiglass)
• 100% Made in Germany / assembly by hand
• 30 Years of experience in PVC filter and skimmer construction

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Operation and flow rates for silicate / mixed-bet resin filters per hour (recommended):

For water with very low conductivity, it is recommended to use a mixed-bed resin filter. The performance of the upstream osmosis system and the associated flow volume is decisive for the required size.
Mixed-bed resins should be flowed through at a flow rate of approx. 8 - 40 BV/h (bed volume per hour).
This would be passed through with a filter with about 4 liters of mixed bed resin filling, an amount of about 36 - 160 liters per hour.
(2 litres volume = 18 - 80 l/h /// 18 litres volume = 160 - 700 l/h )
At higher water throughput, the residual materials that the osmosis system allows through are filtered out correspondingly poorly. We recommend the use of mixed-bed resins with indicator, i.e. the indication when this is used up / should be replaced.

The mixed-bed filter is ideally suited for the use of resins.
Mixed-bed resins on request. If you have any questions, please send an email to info@royal-exclusiv.de
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////